Dixon Light Tools - Power Controller

DC Power Controllers

FOR A SINGLE TOOL
SK-DU1/UL/A

DUAL UNIT FOR TWO TOOLS
SK-DU2/UL/A

These power controls are required with the DC model screwdrivers. The controllers give the user the option to select a high or low voltage output, which allows the operator to operate the screwdrivers at two rotation speeds (low/high rpm). Both units function with a 6.5 amp overload circuit breaker and manual reset device. A Dual Controller allows two operators to each use a DC electric screwdriver through one controller. The Dual Controller also allows a single operator to use two different DC electric screwdrivers at the same workstation.

Detail specifications for the units can be seen in the chart below.

Power Controller Model

SK-DU1/UL/A or SK-DU2/UL/A

Input Voltage
Input 115V or 230V

Downstream Output Voltage
Low DC 24V Hi DC 32V

Downstream Capacity
Low/Hi MAX 5A

Outside Dimensions
210 x 118 x 85 (mm)

Weight
2.8kg (main body)

AC Cord Length
2M with ground

Applicable Models
SKD-2000L/UL/B

SKD-2200L/UL/B

SKD-2300L/UL/B

SKD-5200L/UL/B

SKD-5200P/UL/B

SKD-5300L/UL/B

SKD-5300P/UL/B